![东莞邦成F8柔印机]()
-
4000000.00/台
- 产品简介：*F8
*双伺服驱动,远程诊断及升级；
Double servo-driven,Remote check/upgrade,
*无需工具换版；
Quick changeover without tooling,
*预套印及自动套印功能；
Pre-registration&Auto-registration
*热风或UV干燥；
Hot air or UV drying,
*记录和调用不同材料的生产数据；
Record the data of different material.
*水冷辊UV配置；气动锁定墨斗，网纹辊与墨斗分离；
Chilled Drum is option,Air cylinder locked ink tray, Separated Anilox with ink pan,
*该设备适用于PVC/PP/PET薄膜，铝箔，纸张/薄膜不干胶，60-400克纸张；
*This press is used forPVC/PP/PET film,AL-foil,PapeFilm PS label,60-400g paper.
*短纸路设计;
*Short web path,
*快速调试，预套印和伺服控制预压力设定；
*Quick set-up ，Pre-registration&Pre-impression by servo;
*套筒式版滚筒；
*Sleeve plate cylinder,
*滑动导轨上可安装其他功能；
*Rail system for portable cold foil creen, etc.,
*可配置反转，剥离复合，模切，收单张，覆膜，冷烫和丝网等装置；
*Turn bar,Delam/relam,Diecutting,Sheeting, Laminating,Cold foil&Screen, etc.
机械速度(Speed) 150m/min
?印刷宽度(Web width) 650/820 mm
重复长度(Repeat length) 229mm-610 mm
?放卷直径(Max. unwind diameter) 1000 mm
?收卷直径(Max. rewind diameter) 1000 mm
多机组(Max. units) 12Units
UV?燥(UV curing power) 400 w/inch
优势一
该设备采用双伺服驱动，能延展更多的功能，使机械操作非常轻松,机器 运行更加稳定，有效避免墨杠；
Build-in dual servo driven system offe more capabilities which makes the operation much easier, stable and eliminates bar marking effectively.
优势二
短纸路的设计，每个印刷色组走纸只有1.5米，8色 印刷的机器整台机器走纸只有18米, 减少了试机损耗和停机换卷损耗；
Short web path design for only 1.5 meter within a printing station can reduce material waste during start up and job change. Because total footage of a system equipped with eight colo printing is less than 18 mete.
优势三
气动锁定墨斗，使操作更简单、更换订单更快捷；网纹辊与墨斗分离,调整油墨时无需拆下网纹辊.
Air cylinder locked ink tray,Much easier and quicker change.Separated Anilox with ink pan
优势四
该设备具有预套印和自动套印功能，设置了先进的张力控制装置，生产速度变化不影响套印，从试机速度提高到实际生产速度不会产生任何损耗；
Press is equipped with preregistratioauto registratioadvanced teion control device. Change of operating speed will not affect registration. There is no waste during jogging and all the way up to production speed.
优势五
可以选配伺服压力控制和横向打版，更快设定印刷印刷压力和横向套印。
The servo control printing impression & Lateral registration by motor is option, Set up quickly.
优势六
套筒式版滚筒，采用锥形块锁定，方便操作还能保证版滚筒的耐用性和 真圆度。可印刷12微米到400克的卡纸。
The sleeve plat cylinder lock by cone, set up quickly ,durable & keep roundness.12 micron film and 400g paper is viable
由于该设备适合大批量标签产品，薄膜包装和折叠纸盒的生产，是环保，快速，稳定的生产方式。
The F8 is suitable for labels/film packaging & folding carto. it is an environmentally friendly/fast & stable production method.
Double servo-driven,Remote check/upgrade,
Quick changeover without tooling,
Pre-registration&Auto-registration
Hot air or UV drying,
Record the data of different material.
Chilled Drum is option,Air cylinder locked ink tray, Separated Anilox with ink pan,
*This press is used forPVC/PP/PET film,AL-foil,PapeFilm PS label,60-400g paper.
*Short web path,
*Quick set-up ，Pre-registration&Pre-impression by servo;
*Sleeve plate cylinder,
*Rail system for portable cold foil creen, etc.,
*Turn bar,Delam/relam,Diecutting,Sheeting, Laminating,Cold foil&Screen, etc.
Build-in dual servo driven system offe more capabilities which makes the operation much easier, stable and eliminates bar marking effectively.
Short web path design for only 1.5 meter within a printing station can reduce material waste during start up and job change. Because total footage of a system equipped with eight colo printing is less than 18 mete.
Air cylinder locked ink tray,Much easier and quicker change.Separated Anilox with ink pan
Press is equipped with preregistratioauto registratioadvanced teion control device. Change of operating speed will not affect registration. There is no waste during jogging and all the way up to production speed.
The servo control printing impression & Lateral registration by motor is option, Set up quickly.
The sleeve plat cylinder lock by cone, set up quickly ,durable & keep roundness.12 micron film and 400g paper is viable
The F8 is suitable for labels/film packaging & folding carto. it is an environmentally friendly/fast & stable production method.
(Speed 150m/min
Web width 650/820 mm
Repeat length 229mm-610 mm
Max. unwind diameter 1000 mm
Max. rewind diameter 1000 mm
(Max. units 12Units
UV curing power 400 w/inch...
-
东莞市邦泰印刷机械有限公司
2020-11-08
![东莞邦成F3柔印机]()
-
2000000.00/台
- 产品简介：F3柔印机
功能及特性
*全伺服驱动；
*短纸路设计；
*无需工具换版；
*开机前预套印和预先设定印刷压力；
*热风或UV干燥；
*可组合UV滚筒丝网印刷；
*可配置冷烫单元；
*滑动导轨上可安装其他功能
*可配置反转，剥离复合，模切，收单张，覆膜等装置；
*水冷辊UV配置；
*气动锁定墨斗，网纹辊与墨斗分离；
*记录和调用不能材料的生产数据。
*该设备适用于PVC/PP/PET薄膜，铝箔，纸张/薄膜不干胶，60-230克纸张；
技术参数
机械速度：150m/min
大印刷宽度：330/430 mm
重复长度：229mm-502 mm
大放卷直径：760 and/or 1200 mm
大收卷直径：760 and/or 1200 mm
多机组：12
UV干燥：400 w/inch
特性简介
1、该设备采用全伺服驱动，能延展更多的功能，使械操作非常轻松，机器运行更加稳定，有效避免墨杆；
2、短纸路的设计，每个印刷色组走纸只有1.3米，8色印刷加2组模切工位的机器整台机器走纸只有15米，减小了试机损耗和停机换卷损耗；
3、气动锁定墨斗，使操作更简单,更换订单更快捷;网纹辊与墨斗分离,调整油墨是无需拆下网纹辊.
4、该高备采用预压力设定机构，更换版滚筒后网纹辊压力和印刷压力基本无需调整，减少了因压力调准产生的试机纸和试机时间；
5、采用粘黏收废装置，高速生产时模切废料不会断，可将模切废边减少到模切刀要求的低限度，大大提高生产效率和成品率。
6、该高设备设置了先进的张力控制装置，生产速度变化不影响套印，从试机速度提高到实际生产速度不会产生任何损耗；
7、滑动导轨上安装其他选配装置，更方便扩展更多的功能。...
-
东莞市邦泰印刷机械有限公司
2020-04-19
![东莞邦成F5柔印机]()
-
2000000.00/台
- 产品简介：F5柔版印刷机
功能及特性
* 全伺服驱动；
* 短纸路设计；
* 无需工具换版；
* 开机前预先设定印刷压力；
*二次套印；
* 预套印及自动套印功能；
* 热风或UV干燥；
* 可组合UV滚筒丝网印刷；
* 滑动导轨上可安装其他功能；
* 可配置反转，剥离复合，模切，收单张，覆膜等装置；
* 水冷辊UV配置；
* 记录和调用不同材料的生产数据
* 气动锁定墨斗，网纹辊与墨斗分离；
技术参数
机械速度 150m/min
大印刷宽度 330/430mm
重复长度 229mm-502 mm
大放卷直径 760 and/or 1000 mm
大收卷直径 760 and/or 1000 mm
多机组 12
UV干燥 400 w/inch
特性简介
1、该设备采用双伺服驱动，能延展更多的功能，使机械操作非常轻松,机器运行更加稳定，有效避免墨杆；
2、短纸路的设计，每个印刷色组走纸只有1.3米，8色印刷加2组模切工位的机器整台机器走纸只有15米，减少了试机损耗和停机换卷损耗；
3、气动锁定墨斗，使操作更简单、更换订单更快捷；网纹辊与墨斗分离，调整油墨时无需拆下网纹辊。
4、该设备具备预套印和自动套印功能，设置了先进的张力控制装置，生产速度变化不影响套印，从试机速度提高到实际生产速度不会产生任何损耗；...
-
东莞市邦泰印刷机械有限公司
2020-04-19
![东莞邦成F8柔印机]()
-
4000000.00/台
- 产品简介：*F8
*双伺服驱动,远程诊断及升级；
Double servo-driven,Remote check/upgrade,
*无需工具换版；
Quick changeover without tooling,
*预套印及自动套印功能；
Pre-registration&Auto-registration
*热风或UV干燥；
Hot air or UV drying,
*记录和调用不同材料的生产数据；
Record the data of different material.
*水冷辊UV配置；气动锁定墨斗，网纹辊与墨斗分离；
Chilled Drum is option,Air cylinder locked ink tray, Separated Anilox with ink pan,
*该设备适用于PVC/PP/PET薄膜，铝箔，纸张/薄膜不干胶，60-400克纸张；
*This press is used forPVC/PP/PET film,AL-foil,PapeFilm PS label,60-400g paper.
*短纸路设计;
*Short web path,
*快速调试，预套印和伺服控制预压力设定；
*Quick set-up ，Pre-registration&Pre-impression by servo;
*套筒式版滚筒；
*Sleeve plate cylinder,
*滑动导轨上可安装其他功能；
*Rail system for portable cold foil creen, etc.,
*可配置反转，剥离复合，模切，收单张，覆膜，冷烫和丝网等装置；
*Turn bar,Delam/relam,Diecutting,Sheeting, Laminating,Cold foil&Screen, etc.
机械速度(Speed) 150m/min
?印刷宽度(Web width) 650/820 mm
重复长度(Repeat length) 229mm-610 mm
?放卷直径(Max. unwind diameter) 1000 mm
?收卷直径(Max. rewind diameter) 1000 mm
多机组(Max. units) 12Units
UV?燥(UV curing power) 400 w/inch
优势一
该设备采用双伺服驱动，能延展更多的功能，使机械操作非常轻松,机器 运行更加稳定，有效避免墨杠；
Build-in dual servo driven system offe more capabilities which makes the operation much easier, stable and eliminates bar marking effectively.
优势二
短纸路的设计，每个印刷色组走纸只有1.5米，8色 印刷的机器整台机器走纸只有18米, 减少了试机损耗和停机换卷损耗；
Short web path design for only 1.5 meter within a printing station can reduce material waste during start up and job change. Because total footage of a system equipped with eight colo printing is less than 18 mete.
优势三
气动锁定墨斗，使操作更简单、更换订单更快捷；网纹辊与墨斗分离,调整油墨时无需拆下网纹辊.
Air cylinder locked ink tray,Much easier and quicker change.Separated Anilox with ink pan
优势四
该设备具有预套印和自动套印功能，设置了先进的张力控制装置，生产速度变化不影响套印，从试机速度提高到实际生产速度不会产生任何损耗；
Press is equipped with preregistratioauto registratioadvanced teion control device. Change of operating speed will not affect registration. There is no waste during jogging and all the way up to production speed.
优势五
可以选配伺服压力控制和横向打版，更快设定印刷印刷压力和横向套印。
The servo control printing impression & Lateral registration by motor is option, Set up quickly.
优势六
套筒式版滚筒，采用锥形块锁定，方便操作还能保证版滚筒的耐用性和 真圆度。可印刷12微米到400克的卡纸。
The sleeve plat cylinder lock by cone, set up quickly ,durable & keep roundness.12 micron film and 400g paper is viable
由于该设备适合大批量标签产品，薄膜包装和折叠纸盒的生产，是环保，快速，稳定的生产方式。
The F8 is suitable for labels/film packaging & folding carto. it is an environmentally friendly/fast & stable production method.
Double servo-driven,Remote check/upgrade,
Quick changeover without tooling,
Pre-registration&Auto-registration
Hot air or UV drying,
Record the data of different material.
Chilled Drum is option,Air cylinder locked ink tray, Separated Anilox with ink pan,
*This press is used forPVC/PP/PET film,AL-foil,PapeFilm PS label,60-400g paper.
*Short web path,
*Quick set-up ，Pre-registration&Pre-impression by servo;
*Sleeve plate cylinder,
*Rail system for portable cold foil creen, etc.,
*Turn bar,Delam/relam,Diecutting,Sheeting, Laminating,Cold foil&Screen, etc.
Build-in dual servo driven system offe more capabilities which makes the operation much easier, stable and eliminates bar marking effectively.
Short web path design for only 1.5 meter within a printing station can reduce material waste during start up and job change. Because total footage of a system equipped with eight colo printing is less than 18 mete.
Air cylinder locked ink tray,Much easier and quicker change.Separated Anilox with ink pan
Press is equipped with preregistratioauto registratioadvanced teion control device. Change of operating speed will not affect registration. There is no waste during jogging and all the way up to production speed.
The servo control printing impression & Lateral registration by motor is option, Set up quickly.
The sleeve plat cylinder lock by cone, set up quickly ,durable & keep roundness.12 micron film and 400g paper is viable
The F8 is suitable for labels/film packaging & folding carto. it is an environmentally friendly/fast & stable production method.
(Speed 150m/min
Web width 650/820 mm
Repeat length 229mm-610 mm
Max. unwind diameter 1000 mm
Max. rewind diameter 1000 mm
(Max. units 12Units
UV curing power 400 w/inch...
-
东莞市邦泰印刷机械有限公司
2020-04-19
